Redmi A2 / A2+ PLUS Auto Recovery Fastboot Mode Stuck in No Command Problem Flashing Fix

hasibor September 03, 2025


Redmi A2 / A2+ PLUS Auto Recovery Fastboot Mode Stuck in No Command Problem Flashing Fix





The Redmi A2 and Redmi A2+ PLUS are budget-friendly smartphones from Xiaomi that deliver reliable performance. However, many users encounter a common and frustrating issue — the device getting stuck in Auto Recovery Fastboot Mode or showing a "No Command" screen during flashing. This problem usually occurs while updating, flashing stock firmware, or after a failed recovery process. In this comprehensive guide, we provide a step-by-step flashing fix that can help restore your Redmi A2 / A2+ PLUS to working condition.



Redmi A2 / A2+ PLUS Stuck in No Command / Fastboot Mode

Before applying the fix, it’s important to understand what causes the issue:

  • Incomplete firmware flashing – Interrupted or corrupted flashing may leave the phone in a boot loop.

  • Stock recovery errors – When the device tries to enter recovery but fails, the No Command screen appears.

  • Wrong firmware version – Flashing incompatible firmware can force the phone into fastboot.

  • System crashes during updates – OTA updates may sometimes fail, leaving the phone in recovery mode.

  • Accidental button presses – Users sometimes mistakenly boot into recovery or fastboot mode by pressing power and volume keys together.


How to Fix Redmi A2 / A2+ PLUS Stuck on No Command Screen

If your Redmi A2 or A2+ is stuck on the "No Command" error screen, follow these steps:

Step 1: Access Stock Recovery Properly

  1. Press and hold Power + Volume Up together.

  2. Once the Redmi logo appears, release the Power button but keep holding Volume Up.

  3. This will take you to the MIUI Recovery menu instead of being stuck on No Command.

Step 2: Perform a Wipe Cache

  1. In recovery mode

  2. Select Wipe Data / Wipe Cache.

  3. Confirm and let the process complete.

  4. Restart the device.

(This works if the issue is caused by temporary cache corruption.)

Fix Redmi A2 / A2+ PLUS Stuck in Fastboot Mode

If the phone is stuck in fastboot mode, it requires a firmware re-flash using a PC and official tools.

Requirements

  • A Windows PC or laptop

  • Mi Flash Tool (latest version)

  • Official Redmi A2 / A2+ firmware (Fastboot ROM)

  • A USB data cable

  • Installed drivers (Qualcomm / MediaTek, depending on variant)

Step 1: Download Official Firmware

  1. Visit the official Xiaomi Firmware Database or trusted sources like MIUI ROM Downloads.

  2.  model: Redmi A2 / Redmi A2+ PLUS.

  3. Choose the Fastboot ROM (not recovery ROM).

Step 2: Boot Device into Fastboot

  1. Power off the phone completely.

  2. Connect the phone to your PC via USB.

Step 3: Install Mi Flash Tool and Drivers

  1. Install Mi Flash Tool on your PC.

  2. Ensure all required drivers are properly installed.

  3. Launch the tool and allow administrator permissions.

Step 4: Load Firmware into Mi Flash Tool

  1. Extract the downloaded firmware package.

  2. Open Mi Flash Tool and click on Select.

  3. Browse to the extracted firmware folder and choose it.

Step 5: Flash the Firmware

  1. In Mi Flash Tool, select Clean All (recommended to avoid boot loops).

  2. Click on Refresh to detect the connected device.

  3. Once detected, click Flash.

  4. The process may take a few minutes.

  5. When complete, the phone will automatically reboot.

Alternative Fix Using ADB and Fastboot Commands

If Mi Flash Tool doesn’t work, you can manually flash using ADB and Fastboot commands.

  1. Install Minimal ADB & Fastboot on your PC.

  2. Place the firmware files inside the ADB folder.

  3. Open Command Prompt in that directory.

  4. Type the following commands:

fastboot devices
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash recovery recovery.img
fastboot reboot

(Flash only the required partitions to restore the device.)

When to Perform a Full Format

In cases where the device keeps looping or re-entering fastboot, performing a full format might be necessary. This will erase all data.

  1. Enter Mi Flash Tool.

  2. Choose the Clean All and Lock option (only if you are using official firmware).

  3. Re-flash the complete ROM.

Precautions Before Flashing Redmi A2 / A2+ PLUS

  • Backup your data if possible, as flashing will erase all content.

  • Ensure the battery is above 50% before starting.

  • Use the correct firmware for your exact model.

  • Avoid disconnecting the cable during flashing.

Final Thoughts

The Redmi A2 / A2+ PLUS Auto Recovery Fastboot Mode stuck in No Command problem is a common issue, but with the right steps, it can be resolved easily. Whether you choose to use the stock recovery, Mi Flash Tool, or ADB commands, carefully following the guide ensures that your device returns to normal. Always use official firmware to avoid bricking your phone permanently.


SP FLASH TOOL:- [Link ]


Flash File:- [ Link ]


Tags:

Post a Comment

0 Comments